Descripción
Sika MonoTop40-12 is a one-component, fiber-reinforced, low-shrinkage repair mortar. It contains recycled materials in its composition and helps reduce the values obtained from the carbon footprint.
- Uses recycled materials in its composition
- Application thickness from 6 to 80 mm per coat
- Sulfate resistant
APPLICATIONS
- Sika MonoTop-4012 can only be used by experienced professionals. Repair of all types of reinforced concrete structures and components for:
- building structure
- Civil engineering structures
- Marine structures
- Dams
- Structures that require a class mortar, R4, R3, R2 or R1.
- Indoor and outdoor use.
ADVANTAGES
- Uses recycled materials in its composition
- Application thickness from 6 to 80 mm per coat
- Sulfate resistant
- Hand and machine application (wet spray technique)
- Does not require adhesion primer
- Low permeability
- A1 fire rating
- Low dust technology (low dust emission during handling)
- Class R4 of the EN 1504-3 standard
- Restoration works (Principle 3, method 3.1 and 3.3 of the EN 1504-9 standard) Repair of patches and damage to concrete in infrastructure and superstructure works
- Structural reinforcement (Principle 4, method 4.4 of the EN 1504-9 standard). Increasing the bearing capacity of the concrete structure by adding mortar
- Preservation and restoration of passivity (Principle 7, method 7.1 and 7.2 of EN 1504-9) - Increasing the coating with additional mortar and replacing contaminated or carbonated concrete
COLOR
- gray powder
CONTAINER
- 25 kg bag
PRODUCT DETAILS
- Chemical Base
- Sulfate-resistant cement and cement replacement materials, selected aggregates and additives
- Conservation
- 12 months from manufacturing date
- Storage conditions
- The product should be stored in its original, unopened and undamaged packaging in dry conditions and at temperatures between +5°C and +35°C. Always check the packaging
- Maximum grain size
- Dmax: 2mm
- Soluble Chloride Ion Content
- ≤ 0.05%
APPLICATION
- Mixing Ratio
- 3.50 to 3.75 L of water per 25 kg bag (14 to 15% water by weight of dry cement)
- Fresh mortar density
- ~2.1kg/l
- Layer Thickness
- 6 - 80mm
- Product Temperature
- +5 °C min. / +30 °C max.
- Room temperature
- +5 °C min. / +30 °C max.
- Mix life
- ~60 minutes at +20°C
- Consumption
- ~2.10kg/m2/mm
- This figure is theoretical and does not take into account any additional material due to surface porosity, surface profile, level variations, shrinkage or any other variation. Apply the product in a test area to calculate the exact consumption for the specific conditions of the substrate and the proposed application equipment.
- Performance
- 25 kg of powder is approximately 13.5 L of mortar